General

OZEON® sheet material is a decorative end product what should be treated with care.

Storage

  • Store the sheet material in dry, flat, frost-proof and protected conditions;
  • Use flat pallets for storage and place the pallets on a level foundation. Lift the plates up and do not slide plates over each other;
  • Make sure the plates are stored off the ground;
  • Never stack more than 2 pallets high.
  • Protective sheets should be used again, for example in between plates for protection.

opslag

Move

  • Lift the plates up and do not slide the plates over each other;
  • Protective sheets should be used again, for example in between plates for protection of the upper layer.

Protective film

  • During storage, the board material can be affected more by moisture and night-time cooling than when applied. Before mounting, the boards will need some time to allow any moisture and condensation to evaporate.
  • Remove the protective foil:
    • After mounting, when fixating mechanically with screws;
    • Before priming the board for adhesive bonding
See also chapter documentation where you can download additional technical information.
Print Friendly, PDF & Email